The water leaks associated with a roof setup is one thing that keeps haunting the homeowners. Neglecting the issue for a long time disturbs the overall integrity of your roofing schema.
Though all the locations on the roof are susceptible to potential leaks and seepages, but there are certain areas that deserve an extra care and attention. One of them is the roof valley.
A roof valley is one such spot that is accustomed of such leaks. The depth of the spread allows water to seep into the internal structure of walls and ceilings. A roof valley forms the meeting point of two sides or lines of the roof.
Instead of availing the services of an expert straightaway, apprehend the intensity of the leak and see if it can be fixed by you. If the leak appears a repairable one then prepare yourself for the job. Beforehand, collect all the necessary roofing equipments and tools. It broadly includes a pry bar tool and a probe tool. While the pry bar makes the detachment of the shingles less daunting, the probe tool examines the roof area for faults and irregularities.
Inspect the entire roof spread well with a probe tool and locate any faulty or broken shingles. The most probable reason behind the leaks in the roof valley is the irregularity associated with the shingles or the flashing.
Next, tear off the shingled area with the help of a pry bar tool. Pry up the shingles one by one and expose the area of bare flashing. Hold the edges of the flashing sheet and roll them in to create a hem having width of about one inch. This hem allows the water to flow down into the gutter.
Replace the old shingles with the one ones and envelop the area. Use a hand-held hammer to nail down the shingles one by one. Cover the flashing entirely with the shingles such that a waterproof barrier is rendered.
Finish off the repair work by installing the overlapped shingles over the new shingle setting.
0 responses so far ↓
There are no comments yet...Kick things off by filling out the form below.
Leave a Comment